よくあるご質問
FAQ
Photoelectric Switch
Should I install the PGL based on the center of its housing or the center of the laser spot?
Should I install the PGL based on the center of its housing or the center of the laser spot?
Basically, as long as the laser hits the workpiece, it doesn’t matter if PGL is installed based on the center of its housing or the center of the laser spot.
If you want to install it finely, please install it based on its center of the laser spot.
Relation
-
Should I install the PGL based on the center of its housing or the center of the laser spot?
-
What is the precautions when replacing PDL with PGL?
-
I think there is sampling of PGL-050W3 / 180W3, normal / high speed mode.
Is there any difference in how to capture values between normal and high speed? Is it just a difference in time?
There seemed to be a difference other than time. Please tell me. It is used to detect the end face of a steel rod,
It seems that he wants to refer to it in the averaging process when there are fluctuations due to heat and variations due to temperature. -
What error does 290 mean in PGL?
-
Is PGL affected by magnetic fields?
FAQ's Category
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
FAQ's Tag
- PEY
- PA-S
- PL1
- LAD
- LX1
- DMH
- PNX
- PDL
- DM
- post_tag-195
- BRS
- PK7
- EP1
- PA
- AC
- PD
- PR
- LX2
- LAV
- post_tag-163
- CWF
- RS controller
- S-20
- PH-DX
- MC-A201
- PCF
- BNC
- DMC
- PA-SC2
- DWF
- PB9
- PD5
- ISL
- DME
- PG
- PFX
- KRG
- ISP
- DMF
- DMG
- EWF
- DMS
- FHM
- LA
- HMPD
- FBX
- UXM
- PBS
- KAD
- BWF
- DMJ
- PHF
- PHE
- PX1
- UAM
- URM
- UST
- YVT
- PGL
- LEX
- MFG
- MBX
- VMH
- FG
- PLX
- FC
- DC
- BRC
- PEX
- UTM
- PH
- HSA
- EH8
- MBF
- URG
- UBG
- UGM
- DMM