よくあるご質問
FAQ
Optical Data Transmission Device
How to connect input / output to PLC
I want to connect the input and output to the PLC. What should I do?
Since it is an NPN transistor output type, the input and output of the PLC are connected to the sink type. Please connect the OUT output of the transmission device to the PLC input, connect the IN input of the transmission device to the PLC output, and connect the COM of the transmission device and the – COM of the PLC. The COM of the transmission device is internally connected to the – of the power supply.
Relation
-
Do I have to switch the standby mode and the reception standby mode during transmission?
-
How can I use the GO output?
-
Does the full-width 30 ° of DMS-HB1-V mean that it is 30 ° from the center?
-
I have installed DMS-GF1A-02 or DMS-GF1B-02 near UTM-30LX. Will they interfere with each other?
-
I think that DMG-HB1-Z01 / Z02 / Z03 does not have a ground wire, but how should I take measures against noise?
FAQ's Category
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
FAQ's Tag
- PEY
- PA-S
- PL1
- LAD
- LX1
- DMH
- PNX
- PDL
- DM
- post_tag-195
- BRS
- PK7
- EP1
- PA
- AC
- PD
- PR
- LX2
- LAV
- post_tag-163
- CWF
- RS controller
- S-20
- PH-DX
- MC-A201
- PCF
- BNC
- DMC
- PA-SC2
- DWF
- PB9
- PD5
- ISL
- DME
- PG
- PFX
- KRG
- ISP
- DMF
- DMG
- EWF
- DMS
- FHM
- LA
- HMPD
- FBX
- UXM
- PBS
- KAD
- BWF
- DMJ
- PHF
- PHE
- PX1
- UAM
- URM
- UST
- YVT
- PGL
- LEX
- MFG
- MBX
- VMH
- FG
- PLX
- FC
- DC
- BRC
- PEX
- UTM
- PH
- HSA
- EH8
- MBF
- URG
- UBG
- UGM
- DMM