よくあるご質問
FAQ
Scanning Range Finder (Area Configuration Type)Scanning Range Finder (Data Output Type)
How to connect to the output of the range sensor (NPN)
Please tell me how to connect to the output.
Since it is the open collector output of the NPN transistor,
Connect the output COM- (gray) to the-side (blue) of the power supply.
Connect output 1 (black) to the-side of the load, and connect the + side of the load to the + side (brown) of the power supply.
Connect outputs 2 and 3 in the same way.
Relation
-
Do you have a CD-R of PBS-03JN application software?
-
When I try to connect to the sensor from Linux, I should be accessing the correct serial port, but I can't.
-
Is there any data on the detection angle of UTM-30LX?
-
I'm running UST using a battery.
The battery voltage became low and the UST failed output.
How low is the voltage / current before the failure output is triggered?
Do you know the exact value? -
The instruction manual says that the USB cable of URG-04LX-UG01 should be USB2.0, but how about USB3.0?
FAQ's Category
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
FAQ's Tag
- PEY
- PA-S
- PL1
- LAD
- LX1
- DMH
- PNX
- PDL
- DM
- post_tag-195
- BRS
- PK7
- EP1
- PA
- AC
- PD
- PR
- LX2
- LAV
- post_tag-163
- CWF
- RS controller
- S-20
- PH-DX
- MC-A201
- PCF
- BNC
- DMC
- PA-SC2
- DWF
- PB9
- PD5
- ISL
- DME
- PG
- PFX
- KRG
- ISP
- DMF
- DMG
- EWF
- DMS
- FHM
- LA
- HMPD
- FBX
- UXM
- PBS
- KAD
- BWF
- DMJ
- PHF
- PHE
- PX1
- UAM
- URM
- UST
- YVT
- PGL
- LEX
- MFG
- MBX
- VMH
- FG
- PLX
- FC
- DC
- BRC
- PEX
- UTM
- PH
- HSA
- EH8
- MBF
- URG
- UBG
- UGM
- DMM
