よくあるご質問
FAQ
3D LiDARScanning Range Finder (Area Configuration Type)
About output logic
Please tell me about the output logic of the Scanning Range Finder.
Output is turned off when detected by the output logic “Active High” (default value) ,
the output logic “Active Low” can be set to turn on the output at the time of detection.
You can change it in the sensor settings with the application software.
However, the fault output cannot be logically changed.
Relation
-
What is the vertical resolution of YVT?
-
Which side of the PBS optical window is the light emitting side, top or bottom?
-
I get an optical window / short-distance error when using the muting function. Is it normal that short-distance error occurs if there is an object near the sensor even in muting mode?
The cause is probably smoke. Smoke will be a trigger of the short-distance error. -
What happens if On-delay / Off-delay is set?
-
I have connected the output COM, but there is no output. What should I do.
FAQ's Category
- Scanning Range Finder (Data Output Type)
- Scanning Range Finder (Area Configuration Type)
- Photoelectric Switch
- 3D LiDAR
- Area Configuration Type
- Optical Data Transmission Device
- Sensor for Iron and Steel Industry
- Area Configulation Type
- Optical Remote Control Device
- Auto Counter
- Sensor for Textile Industry
- Application
- Laser Range Finder
FAQ's Tag
- PEY
- PA-S
- PL1
- LAD
- LX1
- DMH
- PNX
- PDL
- DM
- post_tag-195
- BRS
- PK7
- EP1
- PA
- AC
- PD
- PR
- LX2
- LAV
- post_tag-163
- CWF
- RS controller
- S-20
- PH-DX
- MC-A201
- PCF
- BNC
- DMC
- PA-SC2
- DWF
- PB9
- PD5
- ISL
- DME
- PG
- PFX
- KRG
- ISP
- DMF
- DMG
- EWF
- DMS
- FHM
- LA
- HMPD
- FBX
- UXM
- PBS
- KAD
- BWF
- DMJ
- PHF
- PHE
- PX1
- UAM
- URM
- UST
- YVT
- PGL
- LEX
- MFG
- MBX
- VMH
- FG
- PLX
- FC
- DC
- BRC
- PEX
- UTM
- PH
- HSA
- EH8
- MBF
- URG
- UBG
- UGM
- DMM