Archive カテゴリ：Optical Data Transmission Device

FAQ's Category

Scanning Range Finder (Data Output Type)

Scanning Range Finder (Area Configuration Type)

Photoelectric Switch

3D LiDAR

Area Configuration Type

Optical Data Transmission Device

Sensor for Iron and Steel Industry

Area Configulation Type

Optical Remote Control Device

Auto Counter

Sensor for Textile Industry

Application

Laser Range Finder

Archive カテゴリ：Optical Data Transmission Device

What is the difference between BWF- □ 1A and BWF- □ 1B?

Which of IN / OUT does the signal send?

Do I have to switch the standby mode and the reception standby mode during transmission?

Is it possible to communicate with other data transmission devices?

Is it possible to communicate between the V type and the E type of the DMS series?

Is a cable to connect with the connector included?

How can I retrieve the logs saved in DMJ?

Is DMH-GB1 / HB1 compatible with other data transmission devices?

Is DMH-GC / HC able to communicate with other data transmission devices?

Can DMS-GF/HF communicate with RS-232C type and RS-422 type?

It is said that we need two units to use it as a pair, but can we get two per order?

Does BWF come with a cable?

Is it possible to communicate with RS-232C type and RS-422 type?

A power supply terminal is provided separately in addition to the interface connector. Do I need to supply power to both?

There are two types, EWF- □ EA-N and EWF- □ EB-N. How do you use them?

Does the mounting bracket come with when purchasing the EWF?

When installing EWF next to each other, how much interval needed between?

There are normal mode, master mode, and slave mode. How should I use the operation mode properly?

Does BWF-4E-SF have a safety category?

Can EWF-0V be used with SSCNET III / H?

When confirming data transmission / reception, should the IN and OUT signals be recognized as confirmed when both the GO signal and strobe signal are ON? As a strobe signal, ON-OFF is repeated, but normally, what is the ON time and OFF time?

I am adjusting the optical axis of BWF-3EA/3EB, but is it normal that 3EA lights only R (light receiving level on the other side) and 3EB lights only S (light receiving level on the own station side)?

How should I connect the terminating resistor to DMM-GC1?

Does it support cc-link?

Can the DMS series communicate between NPN type and PNP type?

Please tell me the difference between DMS- ○○ -V and DMS- ○○ -E.

Please tell me the external specifications of the cable.

Why is the optical axis matching indicator blinking?

About the meaning of the current value of DMS

Are there any precautions to take when replacing DMS-HF1A-02 (232C) with DMS-HF1A-12 (422)?

Is it possible to convert only one side of BWF to parallel with ISP (serial-parallel converter)?

Is there 16-bit PNP type data transmission device?

What is the weight of ISL-A1B?

Does it meet the cable redundancy specification with the EtherCAT ring topology? Does it work effectively when installed between slaves in a redundant network?

Is BNC-HB attached to the device side or the vehicle side?

I want to connect the input and output to the PLC. What should I do?

There are A type and B type, what is the difference?

Is it possible to communicate with the head-on type and the side-on type?

I will install an adjacent optical data transmission device, but will it interfere each other?

A white connector is attached at the time of delivery. Will you use this to connect?

What is the meaning of "class 2" on the DMS housing?

Is the light source of BWF-11A / B visible light?

What is the difference between EWF-0EA-01 and EWF-1E-N?

Why does PR-FDS-3R-01 recognize that there is an object when there is in fact no object?

What is select input?

Please tell me how to connect DMS.

How long is the attached screw of DMS-HA2-Z01?

What is the difference between DMJ-CN3 and DMJ-CN3-Z01?

Are there any countermeasures in case of interference between PGL and BWF-2C?

Do you have vertical characteristic data for DMS?

How can I use the GO output?

I want to connect DME-GB1-PE with a PoE hub in between. Is there a similar product?

About blocking when downloading application software

How many meters can the cable be extended?

Does the full-width 30 ° of DMS-HB1-V mean that it is 30 ° from the center?

Is it possible to use DMS-GB2-E with two fixed sides and one moving side?

How should I connect the terminating resistor of DMM-HC1?

Are there any optical data transmission devices that support UL standards?

Does DMG-HB1-Z01 / Z02 / Z03 support SEMI E84-1000?

I think that DMG-HB1-Z01 / Z02 / Z03 does not have a ground wire, but how should I take measures against noise?

I have installed DMS-GF1A-02 or DMS-GF1B-02 near UTM-30LX. Will they interfere with each other?

Can the optical remote control be used outdoors?

How to understand the direction of input and output of DMS

Please tell me how to turn the power of the transmitter on and off.

Since the transmitter has broken down, is it possible to operate by replacing only the transmitter?

If there is no device on the other side, will the DMM be in an abnormal state?

When using multiple BWF-11, is it okay to put the multiple RS422 signals into one host?

Is it possible to communicate between 4bit and 8bit?

What is the life time of DMS-HB1-Z41?

Is it possible to communicate between DMH-HB4 and DMS-HB1-Z01?

Are the attached screws of DMG-HB1-Z03 and DMJ-HB1-Z01 the same?

Does DMS-GB1-V support RoHS2?

Is it possible to monitor EWF-0 / 1E-N with a PLC app?

What is the weight of EWF?

Is it possible to communicate with the combination of DMJ-HB1 and DMJ-CN3-Z01?

Is it possible to communicate between DMJ and DMG?

What is the outer diameter of the DMS-HF1B cable?

What is the difference between DMH-GC1-P03 and the standard product?

Why doesn't BWF-17A / B work? The power indicator is on, but it doesn't work.

When confirming data transmission / reception, should the IN and OUT signals be recognized as confirmed when both the GO signal and strobe signal are ON?
As a strobe signal, ON-OFF is repeated, but normally, what is the ON time and OFF time?

Does it meet the cable redundancy specification with the EtherCAT ring topology?
Does it work effectively when installed between slaves in a redundant network?