Archive タグ：URG

FAQ's Category

Scanning Range Finder (Data Output Type)

Scanning Range Finder (Area Configuration Type)

Photoelectric Switch

3D LiDAR

Area Configuration Type

Optical Data Transmission Device

Sensor for Iron and Steel Industry

Area Configulation Type

Optical Remote Control Device

Auto Counter

Sensor for Textile Industry

Application

Laser Range Finder

Archive タグ：URG

What is contamination detection?

How much can the cable be bent?

A white connector is attached at the time of delivery. Is this for making connection?

What is response time?

I created an area and wrote to the sensor, but why is it output even though there is no object in the area?

What happens if On-delay / Off-delay is set?

Please tell me how to set the hysteresis.

Please tell me how to connect to the output.

Is it possible to install the sensor upside down?

Does it work even if power is supplied from the battery?

The URG-04LX has a range of 60 to 4095 mm and a range of 20 to 5600 mm. Does this mean that the range of 60 mm or less does not meet the range of accuracy described in the product specifications? 2. In that case, can you tell us what kind of response you will get in the range of 20mm to 60mm?

Are there any precautions to take when attaching a cover?

Please tell me about the output logic of the Scanning Range Finder.

Is there any way to deliberately put the sensor in a malfunction state?

Sensors Interfere with each other. Please tell me the measures.

I want to connect to a PC and edit the area with the application, but the sensor is not recognized. What should i do?

The light from the sensor is affecting other devices. Is there any measures?

Please tell me how to use the app.

Is it possible to use a USB conversion cable when setting the area?

How much communication data does the sensor have?

Sensor erroneously detect that there is an obstacle even though there is no object. Why it happens?

Why is the spread of the light beam different from the front and the side of the LiDAR?

Is there anything I can do if I don't know the IP address of the range sensor?

Is it possible to use the range sensor with Windows pro?

The instruction manual says that the USB cable of URG-04LX-UG01 should be USB2.0, but how about USB3.0?

When was the time stamp acquired?

When I try to connect to the sensor from Linux, I should be accessing the correct serial port, but I can't.

Is it possible to acquire data from multiple sensors at the same time?

Does the range sensor also support Linux?

When I run an application that uses the URG library on a PC with low specifications, a communication error sometimes occurs.

When I install the USB driver and connect the sensor, the mouse cursor moves randomly and clicks on various places.

URG driver cannot be installed on Windows Embedded Standard 7

When using URG-04LX-UG01, it is necessary to prepare a USB cable separately, can I use other cables other than Hokuyo's original URG-C001?

What kind of output is synchronous output?

I connected to a PC, but it does not recognize the sensor. What should I do.

The optical window has become dirty. Please tell me how to clean it.

Does the sensor run on USB bus power?

About the Use of Cookies

The URG-04LX has a range of 60 to 4095 mm and a range of 20 to 5600 mm. Does this mean that the range of 60 mm or less does not meet the range of accuracy described in the product specifications?
2. In that case, can you tell us what kind of response you will get in the range of 20mm to 60mm?

I want to connect to a PC and edit the area with the application, but the sensor is not recognized.
What should i do?