Archive タグ：UTM

FAQ's Category

Scanning Range Finder (Data Output Type)

Scanning Range Finder (Area Configuration Type)

Photoelectric Switch

3D LiDAR

Area Configuration Type

Optical Data Transmission Device

Sensor for Iron and Steel Industry

Area Configulation Type

Optical Remote Control Device

Auto Counter

Sensor for Textile Industry

Application

Laser Range Finder

Archive タグ：UTM

What is contamination detection?

The optical window has become dirty. Please tell me how to clean it.

Is it possible to use a USB conversion cable when setting the area?

How much can the cable be bent?

A white connector is attached at the time of delivery. Is this for making connection?

I created an area and wrote to the sensor, but why is it output even though there is no object in the area?

What happens if On-delay / Off-delay is set?

Please tell me how to set the hysteresis.

Please tell me how to connect to the output.

Is it possible to install the sensor upside down?

Does it work even if power is supplied from the battery?

I connected to a PC, but it does not recognize the sensor. What should I do.

What is the conductor size of the cable?

Are there any precautions to take when attaching a cover?

Please tell me how to use the app.

Please tell me about the output logic of the Scanning Range Finder.

Sensors Interfere with each other. Please tell me the measures.

I want to connect to a PC and edit the area with the application, but the sensor is not recognized. What should i do?

The light from the sensor is affecting other devices. Is there any measures?

Sensor erroneously detect that there is an obstacle even though there is no object. Why it happens?

Is there any way to deliberately put the sensor in a malfunction state?

When I try to connect to the sensor from Linux, I should be accessing the correct serial port, but I can't.

What is the scratch resistance of UTM-30LX-EW before and after hard coating?

Does the range sensor also support Linux?

About blocking when downloading application software

Why is the spread of the light beam different from the front and the side of the LiDAR?

Is there anything I can do if I don't know the IP address of the range sensor?

Is there any data on the detection angle of UTM-30LX?

What is the difference between the vibration and shock resistance of UTM-30LX and the vibration and shock resistance of the quality reference value?

Is it possible to use the range sensor with Windows pro?

When was the time stamp acquired?

Is it possible to use the own program with UTM-30LX-EW, which is created with UTM-30LX?

Is it possible to acquire data from multiple sensors at the same time?

How much communication data does the sensor have?

When I run an application that uses the URG library on a PC with low specifications, a communication error sometimes occurs.

When I install the USB driver and connect the sensor, the mouse cursor moves randomly and clicks on various places.

The scan cycle of UTM-30LX-EW should be 25ms, but sometimes it becomes 50ms.

URG driver cannot be installed on Windows Embedded Standard 7

I have installed DMS-GF1A-02 or DMS-GF1B-02 near UTM-30LX. Will they interfere with each other?

What kind of output is synchronous output?

Do you need a exclusive driver for Ethernet type?

About the Use of Cookies

I want to connect to a PC and edit the area with the application, but the sensor is not recognized.
What should i do?